 |
|
How to Insert a
Photograph
in your
Emergency Identification Document
Method 1. Insert from a file
| 1 |
|
Click where you want to insert the picture (i.e. in the
yellow zone in the top left hand corner of the box outlined in green) |
|
 |
| 2 |
|
On the Insert menu, point
to Picture, and then click
From File. |
|
|
|
3
|
|
Locate the picture you want to insert.
|
|
 |
| 4 |
|
Double-click the picture you want to insert.
|
|
|
Method 2. Insert from a scanner or digital camera
For this procedure, make sure your device is
TWAIN-
or
WIA-compatible and is connected to your computer. You should also make
sure that you have installed the device software that supports TWAIN or WIA.
| 1 |
|
Set up the picture in the scanning device.
|
| 2 |
|
On the Insert menu, point to
Picture, and then click
From Scanner or Camera.
|
| 3 |
|
If you have more than one device attached to your computer, under
Device, select the device you want to use.
|
| 4 |
|
Do one of the following:
-
If the selected device is a scanner, and you want to
use default settings for scanning the image, click
Web Quality, and then click
Insert to scan your picture.
-
If the selected device is not a scanner (for example,
if it's a digital camera) or you want to customize any settings before
you scan the picture, click Custom
Insert. Follow the instructions that come with the device you're
using
|
| Note
|
|
The Insert button
might be unavailable with some scanners because the scanner software doesn't
support an automatic scan. Use the Custom
Insert button instead. |
|
|
Click on flag to translate page to another
language
 |
